SenderCAN® Plus

Our upgraded line of I/O modules designed to simplify data integration with your rugged applications. Power Supply & Analog Inputs Power Supply: - Operating Voltage: 7-35 VDC - Nominal Current: 30-40 mA - Sleep Mode: Not Available Analog Inputs: - 12 Bit A/D Converter, 4096 bits resolution - 4 Configurable Inputs (Digital/Resistive/Voltage/Current) Resistance Mode: - Range: 0 to 10K ohm, 1K ohm internal pullup - Resolution: 0-1K ohm (1 ohm), 1-5K ohms (5 ohms), 5-10K ohms (15 ohms) Voltage Mode: - Low Range: 0-4.6Vdc, 1.2mV resolution - High Range: 0-32Vdc, 8mV resolution Current Mode: - Range: 0-23mA, 0.006mA resolution - 4-20mA mode with 200 Ohm Shunt Resistor Digital & Frequency Inputs Digital Inputs: - Configurations: Open, Closed to B+, Closed to B- - Switch Current: 3mA @ 12Vdc, 10mA @24Vdc (Closed to Battery Positive), 5mA @12Vdc, 5mA @24Vdc (Closed to Battery Negative) Frequency Inputs: - Optically Isolated: 3Vrms Min, 30Vrms max, 30Hz – 10Khz - Compatible Sensors: Magnetic Pickup, Alternator, Hall Effect Digital Outputs & CAN Communications Digital Outputs: - 2 Low-side FETs: 250mA Max - Configurable: CAN Message or Fault Status controlled - PWM Control: 3.9Khz frequency, 0-100% duty cycle CAN Communications: - 1 CAN Port: J1939 Protocol - 120 ohm termination resistor (software selectable) - Programmable: Firmware and configuration via CAN using E-Com cable